Bring the pines indoors with this beautiful pine cone style fan. The carved
details are incredibly real and the carved wood is a naturally aged pine
finish. Add either style light kit for a complete fan perfect for any
bedroom or family room. These fans are normally in stock and come
standard with knotty pine blades. The fan is now
both indoor and outdoor UL rated. Outdoor models use
acrylic blades colored to look like the aged pine.
Please specify indoor or outdoor when ordering so we can
send the proper blades.
On Special $100 off
Model CC52PD5OWL 52" fan with pine cone motif
with optional old world leather blades ($21)
$356 On sale for $256
Shown with optional light kit
CCY330AOWL ($63), glass shades ($14
each) and 12" pine
needle scroll CCAC-2030 -12 ($45),
the 24" scroll kit model CCAC-2030-24 is $68,
18" down rod
( $12) note the CCY330A
fitter now has all the lights pointing down as shown in the
picture at right.
optional old world
leather blades ($21 set)
Shown with optional light kit CC330AOWL
($63)
and 12" pine needle scroll CCAC-2030 ($45), 12" down rod
($9) and shade
model CCG194 ($16 each)
Light Kit
Special: We did a buyout on this special order
light kit shown above. It takes 3- 40W candelabra and is
normally $88, on closeout while they last for $45. 14 available
Fan not included
New- Light kit for the Ponderosa Fan- Can be used for either
indoor or outdoor wet locations. Measures 7" tall by 13"
wide and uses 3-40W candelabra bulbs for
moderate light. The light kit is also available as a ceiling
light for both indoor or outdoor use. Model CCPDLIGHTKIT $94
Brand New Ceiling light to match the Ponderosa ceiling fan. It
uses 3-40W candelabra bulbs for moderate light output and is
rated for both indoor and outdoor wet location use. 13" wide by
10" tall. Model CCPDCEILINGLIGHT
$94
Specifications
Available Colors
Old world leather as shown here
Blades
Available blades are a 44" in pine, 52" in
pine, 52" in darker OWL and 52" in waterproof pine colored acrylic
for outdoor use.
Specifications
Fan without light kit is 14" tall with the included
5" down rod. Add 7" for CCPDLIGHTKIT and 9" for CCY330A with
typical glass.
14 degree blade pitch, total height of fan is 14
inches tall without light kit or scroll kit. Add 6" for the light
kit. Scroll kit requires a 12" down rod which adds 8" to the fan.
Fan weight is approximately 35 pounds.
Motor Rating
Heavy duty 188mm x 15mm motor
Controls
Model WC11-IV
Add $28
Model WC11-WH
Add $28
Model WC12-IV
Add $22
Model WC12-WH
Add $22
Model CMUC2000-3
Wall control with receiver Add $55
Model CMUC2000 Hand Held
control with receiver
Add $55
Model CMUC2000-2 combination
hand held and wall control with receiver
add $74
Fan Includes a 3 speed pull chain switch and manual reverse
switch on the motor. All controls are non reversing. The wall
controls fit into a single gang electrical box and use a standard
rocker opening.
Extension Rods
The fan comes with an 5" long extension rod.
Additional models are available in 12"
($10), 18" ($15), 24" ($22), 36" ($27), 48"
($34), 60" ($44) and 72" ($52). Most
sizes are usually in stock and color matched
to the fan.
Light Kit
180W down light optional- see above
Location
Dry Location Rated (Indoors
only)
Adaptors
Slope ceiling adaptor, hand held remote - not
flush mount adaptable
